Fits: HONDA MSX125 (GROM) - Non ABS 13-16
About quality and texture: I am happy with the quality of the stainless steel front brake hose from HEL. All components are stainless steel from the brake hose to the banjo fitting and even the banjo bolts.About the feeling of use: The look of the carbon hose is a nice subtle addition while the performance improvement is very noticeable when compared to the OEM Honda rubber hose.Products to buy together: The matching rear brake hose from HEL would also be desirable to purchase alongside the stainless steel front brake hose to complete the look and performance all round.Difficulty of installation: The process to install takes about one hour to complete, remove as much of the old brake fluid as possible from the reservoir then undo the banjo bolts and remove the OEM Honda brake hose. Route the HEL brake hose as the OEM Honda brake hose was and torque down the banjo bolts before bleeding fresh brake fluid through.Cost performance and comparison with other products: Good costing as you are getting a quality front brake hose made from all stainless steel components as compared to some other brands that use aluminium and only at a slightly higher price.About shipping and packaging: Sea frieght was my preferred method of shipping due to the lower cost but currently this service is unavailable from Japan Post, EMS is much faster which is nice. Webike kept me updated on the status of my order up to when it shipped. The parcel arrived within the expected date range and was well packaged with no chance of the part being damaged.Any concerns, cautions, or advice when purchasing: HEL brake hoses use stainless steel for their hose material and use the crimped method for their banjo fittings which is the best material and manufacturing method you can get.View Detail
About quality and texture: I am happy with the quality of the banjo bolt from HEL, made from stainless steel and sized in M10 with a metric thread pitch of 1.25. Nice that new copper sealing washers are also included.About the feeling of use: Previous owner of my Grom reused the OEM banjo bolts when installing stainless steel braided brake lines and the addition of the HEL stainless steel banjo bolts has now completed this upgrade. They look perfect with their slim design and wonderful surface finish.Products to buy together: Some stainless steel braided brake lines would also be desirable to purchase along side the stainless steel banjo bolts and HEL also have these on offer here on Webike.Difficulty of installation: The process to install takes about 30 minutes, position some rags to soak up any brake fluid that may leak out when the old banjo bolt is removed and install the stainless steel banjo bolt with it's new copper sealing washers and torque down to 34N m. I also bled the brake line to ensure no air was introduced into the system during the replacement. Not difficult to do.Cost performance and comparison with other products: Good costing as you are getting a durable stainless steel banjo bolt as compared to the aluminium banjo bolts on offer from the majority of the companies and at no significant price difference.About shipping and packaging: Sea freight was my preferred method of shipping due to the lower cost but currently this service is unavailable from Japan Post, EMS is much faster which is nice. Webike kept me updated on the status of my order up to when it shipped. The parcel arrived within the expected date range and was well packaged with no chance of the part being damaged.Any concerns, cautions, or advice when purchasing: There are numerous designs, sizes and thread pitches available in banjo bolts so be sure to research and purchase the correct ones to suit your motorcycle.View Detail
Fits: HARLEY-DAVIDSON
Wow, this is by far the best upgrade I've made to my XR1200.Perfect fit. Also these are the traditional style where one line comes from the master cylinder and splits to both wheels at the factory position. The XR1200's braking performance has increased. brake feel is better.This removed all the spongy feel from my brakes .Super easy installation. It looks strong and beautiful. I strongly recommend.View Detail
About quality and texture
После распаковки шланга сразу чувствуется полумягкая оплетка цвета карбон, все металлические элементы изготовлены из нержавеющей стали.
В комплекте находится сам шланг, готовый к установке, 4 уплотнительных шайбы из меди, 2 банджо болта из нержавеющей стали, а также стикеры HEL и некоторая документация.
About the feeling of use
После установки, а также замены тормозной жидкости и полного обслуживания тормозной системы получаем очень отчетливые, уверенные и быстросхватывающиеся тормоза, при нажатии на рычаг тормоза поршень суппорта быстрее начинает движение, по сравнению со стандартным тормозным шлангом, соответственно схватывание тормозов проиходит намного быстрее
Products to buy together
Шланг полностью готов к установке ""из коробки"", так как имеет все необходимые принадлежности, банджо-болты, уплотнительные шайбы
Однако для установки также требуется тормозная жидкость
Difficulty of installation
Помимо простой замены шланга на новый, также необходимо прокачивать тормозную систему, где зачастую возникают трудности, это нужно иметь в виду
Cost performance and comparison with other products
Цена не самая высокая в такой категории, однако, производительность намного выше стандартного шланга, что отбрасывает все сомнения
About shipping and packaging
Весь комплект упакован в фирменную коробку HEL, что исключает повреждение комплектующих
Any concerns, cautions, or advice when purchasing
При покупке всегда учитывайте, что необходимо менять тормозную жидкость, а также производить полное обслуживание тормозной системы, так как это ваша безопасность
----------------------------------------------------------About Quality and TextureAfter unpacking the hose, a half -dead braid of carbon color is immediately felt, all metal elements are made of stainless steel.The kit contains the hose itself, ready for installation, 4 sealing washers made of copper, 2 gangbagos of stainless steel bolt, as well as HEL stickers and some documentation.About the Feeling of UseAfter installing, as well as the replacement of the brake fluid and full maintenance of the brake system, we get very distinct, confident and fast -quick brakes, when pressed on the brake lever, the port of the caliper begins to move faster, compared with standard brake hose, respectively, the gravity of the brakes occurs much fasterProducts to Buy TogetherThe hose is completely ready for installing ""out of the box"", as it has all the necessary accessories, gang-bolt, sealing washersHowever, the installation also requires brake fluidDifficulty of InstallationIn addition to a simple replacement of the hose with a new one, it is also necessary to pump a brake system where difficulties often arise, this must be borne in mindCOST Performance and Comparison with Other ProductsThe price is not the highest in this category, however, the performance is much higher than the standard hose, which discards all doubtsABOUT SHIPPing and PACKAGINGThe entire kit is packed in a HEL proprietary box, which excludes damage to componentsAny Concerns, Countions, Or Advice When PurchacingWhen buying, always take into account that it is necessary to change the brake liquid, as well as produce full maintenance of the brake system, as this is your safetyPowered by Google TranslatorView Detail
Fits: HONDA MSX125 (GROM) - Non ABS 13-16
* About quality and texture, This product includes stainless steel banjo bolts along with the copper crush washers to complete the installation. Stainless steel banjo fittings are firmly attached to the the stainless steel braided hose via a swaging process.* About the feeling of use, Brake feel and performance have increased and the finish of the stainless steel hose with associated stainless steel hardware gives the braking system a much higher quality appearance.* Products to buy together, The matching rear brake hose from HEL is recommended.* Difficulty of installation, Installation includes the fitting and bleeding of the brake hose. The process was completed over several hours due to the difficultly bleeding all the air from the hose.* Cost performance and comparison with other products, There are cheaper stainless steel brake hose options available but when it comes to brakes you don't necessarily what that, I much prefer the banjo fitting to be swaged to the brake hose for safety. I have used HEL in the past and with continue to use them in the future for piece of mind while riding.* About shipping and packaging, I am happy to wait 8 weeks on average for my parts to arrive in Sydney Australia via Webike's sea freight which comes with tracking and insurance so I know I'm covered in case something was to go wrong but with there outstanding bubble wrapping and boxing there have been no problems.* Any concerns, cautions, or advice when purchasing, The Honda OEM rubber brake hoses do deteriorate over time so this purchase is not just about better performance but also about safety. Use the product reviews to assist in making a decision on your purchase.View Detail
Fits: HONDA MSX125 (GROM) - Non ABS 13-16
* About quality and texture, Stainless steel banjo fittings are crimped in place on the stainless steel braided hose and included are stainless steel banjo bolts along with the copper crush washers to complete the installation.* About the feeling of use, The appearance of the clear sheath over the stainless steel braid looks very impressive and the brake performance has definitaly improved over the old Honda OEM rubber hose.* Products to buy together, A new fancy Vee brake rotor from EBC would be nice to upgrade along with the brake hose for better performance.* Difficulty of installation, Installation included the fitting and bleeding of the brake hose. The process was completed in 60 minutes with no difficultly.* Cost performance and comparison with other products, The HEL rear brake hose is not the cheapest but still priced very well for a full stainless steel brake hose with crimped fittings for maximum safety and reliability from a world leader in braking.* About shipping and packaging, I am happy to wait 8 weeks on average for my parts to arrive in Sydney Australia via Webike's sea freight which comes with tracking and insurance so I know I'm covered in case something was to go wrong but with there outstanding bubble wrapping and boxing there have been no problems.* Any concerns, cautions, or advice when purchasing, If you are not familiar with the prcess of bleeding brakes them you may also want to purchase a brake bleeding kit to make sure all the air is removed from the newly installed brake hose, also available here on Webike. Use the product reviews to assist in making a decision on your purchase.View Detail
The best brake line ever.I installed it my Korean version Supercub110.Very exellent feel when I try to stop by front brake. I love it.View Detail
About quality and texture
Прекрасное качество изготовления шланга, штуцер обжат качественно и при этом способен вращаться вокруг для более точной настройки, НО для этого нужно приложить усилие, сам шланг цвета карбон, штуцера из нержавеющей стали, после обжимки гильзы закрываются термоусадочной трубкой для надежности
About the feeling of use
После установки и прокачки системы ручка тормоза становится менее короткоходной, появляется более уверенное торможение без потерь давления в магистрали, даже после слабого нажатия рычага тормоза колодки начинают движение
Products to buy together
Вместе со шлангом необходимо приобрести новые уплотнительные шайбы, а также банджо-болты, шланг поставляется без них, учитывайте резьбу на болтах
Difficulty of installation
Установка очень проста, а вот с прокачкой тормозной системы придется повозиться
Cost performance and comparison with other products
Данный продукт зачастую дороже других производителей, но оно того стоит, безупречное качество и проверенный годами бренд, выпускающий тормозные шланги много лет
About shipping and packaging
Упаковано в коробку, где лежит шланг и стикеры HEL, а также в дополнительную упаковку от Webike
Any concerns, cautions, or advice when purchasing----------------------------------------------------------About Quality and TextureThe excellent quality of the manufacture of the hose, the fitting is squeezed with high quality and is able to rotate around for a more accurate tuning, but for this you need to make an effort, the hose of the color of carbon, the stainless steel fitting, after compression, are closed with a heat -ousse tube for reliability for reliabilityAbout the Feeling of UseAfter installing and pumping the system, the brake handle becomes less short -handed, there is a more confident braking without loss of pressure in the highway, even after a weak pressing of the brake lever, the pads begin to moveProducts to Buy TogetherTogether with the hose, it is necessary to purchase new sealing washers, as well as gang-bolt, the hose comes without them, take into account the threads on the boltsDifficulty of InstallationThe installation is very simple, but with pumping the brake system you will have to tinkerCOST Performance and Comparison with Other ProductsThis product is often more expensive than other manufacturers, but it costs an impeccable quality and a brand proven for years, which produces brake hoses for many yearsABOUT SHIPPing and PACKAGINGPacked in a box where the Hel hose and stickers lies, as well as in additional packaging from WebikeAny Concerns, Countions, Or Advice When PurchacingPowered by Google TranslatorView Detail
About quality and texture - Excellent quality, smooth glossy black hose and stainless fittings.About the feeling of use - Very happy with the performance of the brakes after installing these, no other brake upgrades required for me.Products to buy together - You will want to add some HEL banjo bolts and crush washers.Difficulty of installation - Medium level of difficulty on the installation as a whole, bleed the air out of a hose from new is time consuming. Took me a few hours until I was happy with the feel.Cost performance and comparison with other products - I find HEL price similar to other brands but I prefer the slimmer finish of the swagged banjo fittings then other brands where the hose bolts up to the fittings.About shipping and packaging - No damage to any of the products due to the excellent packaging. I am happy to wait for my items to arrive via sea freight for the cost savings which I can then use to purchase more parts from Webike.Any concerns, cautions, or advice when purchasing - If you want to maintain the OEM look of your motorcycle but increase the performance of you brakes go with the black hose.View Detail
Fits: BUELL
Another HEL Performance stainless steel braided brake line for the rear of my Buell XB12S. As always a trusted quality product from HEL Performance with their safe and secure clamping method for the one piece banjo fittings so there is no chance of things going wrong out there on the road. Perfect fit and finish on this product but I did have to add some additional protection for where the brake line routes under the rear wheel hugger when I have it installed. Looking forward to another excellent experience with Webike.View Detail