Designed exclusively for 12V bikes Through grip end (bar end can be attached) Grip O.D.: Approx. Φ34mm Grip inner diameter: (Right) Φ25.4mm (Left) Φ22.2mm Grip Length: 125mm Operating voltage: DC12V
*Not suitable for bikes with insufficient power generation capacity or battery-less bikes.If installed on a bike with a low battery or power generation capacity, the insufficient charging capacity may cause battery trouble. *Do not use LEVEL 3 and 4 of the select switch all the time.These settings may cause battery trouble or low temperature burns, so please only use them for rapid heating. *The included bar ends fit inside the handlebars.Not for use with threaded bar end handlebars. *Adhesive for Hot Grip is required. *Hot Grip is a consumable item.The grips will wear out.Replace periodically.
●The grip is thin.Good operability! ●Rapid heating function for up to 4 minutes (Quick heat function). ●Switch mounting bracket included. ●Can be installed on bikes equipped with H.I.D. system. *Always start the engine & H.I.D system before turning on the power. ●Current consumption when power is off: Approx. 0.05mA
Points of Attention
* If there may be an instruction manual included, it will be written in Japanese.
Recently viewed products
Ratings & reviews for this product or related products
This webike purchased DAYTONA heating grip is very easy to use, it has a multi-gear adjustable, the actual temperature experience is very good, let me in the cold winter can be comfortable riding, installation is also relatively easy.View Detail
I can't let go of it anymore. Grip replacement easily warms hands. The temperature control is fine and I am always satisfied with the proper temperature.View Detail
It was just as in the Image, but the wiring seemed a little thin and unreliable.
How was your experience with it? It was good point
? Warms up quickly. Adjustment Button was always about 2. 3 or 4 was too hot to use. ? Power doesn't go down much either. Wiring is Simple (Wired for Wiring for Grip heater with plenty of capacity)
My bad.
Wiring is thin and seems to be unreliable. (Although there is no problem at all.)
The grips are thicker. It took me a while to get used to it. If you have small hands, you might want to be careful. [Points to note]
The diameter of the Grip becomes thicker.
How did it compare to other products? I decided on the price and Review and am satisfied.
I'm generally happy with the price and performance, not as good as the OEM Fit, of course, but it worked LARGE in the winter!
I would like to make another purchase the next time I have the opportunity to buy.View Detail
[How is it used? I use it to protect myself from the cold during the winter season. If I use this kind of product once, I can't go back to it. From ManufacturerOEM to Aftermarket parts manufacturer, there are several types of products that are available. "Warmth. "reliability" "price" Isn't it quite an excellent product from the Balance aspect of Was the one you received as per Image? If you compare it to ManufacturerOEM Product or high-end Aftermarket parts manufacturers' products. "The grip is a little thicker. "It's a separate body, and the Switch is in the way. "It's a pain to install. There is also a part of etc., but the Balance of the price and the function as written above is the product of Image Street well. How was your experience with it? First "Warm and firm (with four temperature control levels) 。 I bought it to keep me warm. "It's better than nothing. We don't want to have a product that is too expensive. In that respect, this product is a product that is true to its claim, and this product alone is effective enough as a measure against the cold. Because it is possible to touch it by mistake when operating Blinker, Horn, and the electric system Switch in the case of the Switch integral type though other people are also described. "I don't like it if it doesn't look Refreshing!" I recommend it to everyone except those who are [Points to note] The Switch part "Waterproof Specification." It's not. But I have been using it exposed for 3 years, and I also use a high pressure washer when my motorcycle gets muddy, although I don't use it intensively... but so far I have not had any problems with it (at my own risk). How did it compare to other products? It's Tough (I don't deny the pros and cons of perhaGap). "Keep the Grip warm." I have used several different products since they first became available on the market. "It's warmer than this." Ya "at a lower price than this item." "It's easier to install than this product." There are products with excellent items such as the following, but I think the feature of this product is that each item is evenly etc. high. I think this is the best product for those who can tolerate a slightly thicker grip than the separate Switch or regular Grip. Other items that would be helpful Point and hang of installation The Instruction Manual that comes with it is easy to understand and even if you are not good at Electric Wiring, you can manage it. But even so "I can't install it!" If you're not sure what you want to do, don't force it and leave it to the PRO. [ITEMS TO BUY TOGETHER If you are worried about loosening the strong RubberBond (I've had no problems for 3 years with just the Bond stopper), use a Wire or Tie Band. [Opinions and requests to Manufacturer I don't have an opinion when it comes to price, features and durability, please keep the price the same and sell it for as long as possible.View Detail
* The BEST and MUST store to find Japanese parts. * Register now for amazing deals and other special offers! *Over 800,000 listed items. It's hard NOT to find your parts.
SIGN IN TO WEBIKE JAPAN
Please enter email at least 6 characters.
Please enter a valid email address.
Email is already in use.
Your account has been banned.
Email address and/or password is not match.
Authentication with facebook fail.Please try again.
Please select How did you get to know about Webike Japan?
OR
YOUR ACCOUNT HAS BEEN CREATED!
Congratulations! Your new account has been successfully created! You can now take advantage of member privileges to enhance your online
shopping experience with us. If you have ANY questions about the
operation of this online shop, please email Webike through CONTACT US.
A confirmation has been sent to the provided email address. If you
have not received it within the hour, please contact us.
Get on your grid by register your motorcycle! About our "Mybike" service
"Easier to Search Items" It helps you to search items to fit for your motorcycle!
"Get Much Valuable Information" It helps you to get special deals, newly listed items and closeouts about your motorcycle!
"Easy to Register" It requires only your motorcycle manufacturer, model name and model year!