Once you select the option, estimate delivery time will be displayed.
*Shipping date and Estimate time of arrival are not guarantee.
Once your orders are placed, we will check the stock of manufacturer and send you the confirmed Shipping time via e-mail.
[Specification] ・Hole machining: Switch hole machined ・Clutch cable (hose) fit: Available ・Fits throttle cable: Available ・Brake hose compatible: Available
[Country of manufacture] Taiwan
*Not compatible with stock bar ends.
*There may be changes in product specifications due to the manufacturer's reasons.
* The image is only for reference. The image shown may differ from the actual product.
Specially designed for models with a comfortable position by moving it forward about 10mm compared to the normal position. The width of the steering wheel is shortened by about 30mm, and the angle of back sweep is added by 2°.The height and the pull are the same as stock.
The design is based on the stock handlebar shape, but the grip part has been shifted in parallel.The angle is the same as the stock one, so you can form a good riding position without damaging the image.
●Original design handle for EFFEX models Available on large global models such as adventure and cruiser models.The original design handlebars are based on the stock design, but within the reach of the stock hoses and wires for a better riding position.
●No need to replace cables It is designed for exclusive use of the model, so you don't have to worry about compatibility. *Depending on the model, it may be necessary to change the minimum cable routing. *For "High", it may be necessary to replace the cables.
●Switch hole machined You no longer need to worry about positioning and preparing tools, and you no longer need to spend extra money. *Some models may not have a switch hole.
●The lever holder can be shifted to the left or right The mounting straight line is designed to be about 5mm longer. The grip position of the lever can be fine-tuned. Bolt-on handlebars for specific models The width of the handlebar is shortened by 30mm and the angle of the aperture is narrowed by 2 degrees, so that the rider can enjoy a more relaxed position.
Points of Attention
* If there may be an instruction manual included, it will be written in Japanese.
Thank you very much, the part fit perfectly. All the holes are in their places. Unfortunately, there are no internal threads at the ends to install original weights, they will need to be ordered additionally I installed the ones that came with the mirrorsView Detail
Great replacement for many naked original equipment,excellent upgrade, aluminum tubing much thicker than stock steel, Great bars and a good price.I like the rise and the bend, standard so no need to modify my clamps or add risers. Light and strong aluminum make for a great set of bars.Best handlebar I have found.Put the black high bend on my 13 mt09.Just need to drill the hole for the throttle mount so it doesn't rotate. Easy to do, just mark and drill.Couple inches wider than stock and a little taller.Thanks for the fast shipping and careful packaging. The only downside is that the shipping costs are very high.The economic shipping is no longer available.View Detail
Since the body is Matte Black and the OEM Handlebar is Silver, I wanted to change the look. It looks good. It is a little narrower than the OEM and easier to maneuver. The position can be changed by just a few centimeters. I guess it depends on each person, but it is easy for us to ride. I ran about 400 km in one day of touring, and I feel that my tiredness has eased up a little. As for the exchange, it took about 40 minutes. Of the 15 minutes, 15 minutes were taken to put in the Grip. (Lol) Since it is vehicle-specific, we also appreciate that it has holes for Switches. The price is not on the cheap side, but I am satisfied with the product.View Detail
I think it's better if I apply Grease to it. Special Tool is not necessary, and I think that the work is an easy part.
The first thing I said when I got on the bike was, "What the hell is this? It's like a Scooter, but with the Handlebar closer and higher, it's the easiest Position you'll ever have. I put in the company's Bar End, so there are no strange vibrations.
Demerit by changing Handlebar is also described. The upper body is standing up too much and the wind pressure is too strong when the speed is released. My hands are too close together and Curve is hard to bend.View Detail
It is introduced to MT-09SP. Certainly, the width becomes narrower than OEM, but the shape does not change so much with NORMAL. Drastic change is not expected. I think that it is easy and good for the person who wants to make the width narrow simply. I wanted to go lower and with the introduction of GPRSteering damper I settled on Fanatic's SUPER low.View Detail
* The BEST and MUST store to find Japanese parts. * Register now for amazing deals and other special offers! *Over 800,000 listed items. It's hard NOT to find your parts.
SIGN IN TO WEBIKE JAPAN
Please enter email at least 6 characters.
Please enter a valid email address.
Email is already in use.
Your account has been banned.
Email address and/or password is not match.
Authentication with facebook fail.Please try again.
Please select How did you get to know about Webike Japan?
OR
YOUR ACCOUNT HAS BEEN CREATED!
Congratulations! Your new account has been successfully created! You can now take advantage of member privileges to enhance your online
shopping experience with us. If you have ANY questions about the
operation of this online shop, please email Webike through CONTACT US.
A confirmation has been sent to the provided email address. If you
have not received it within the hour, please contact us.
Get on your grid by register your motorcycle! About our "Mybike" service
"Easier to Search Items" It helps you to search items to fit for your motorcycle!
"Get Much Valuable Information" It helps you to get special deals, newly listed items and closeouts about your motorcycle!
"Easy to Register" It requires only your motorcycle manufacturer, model name and model year!
?
