Once you select the option, estimate delivery time will be displayed.
*Shipping date and Estimate time of arrival are not guarantee.
Once your orders are placed, we will check the stock of manufacturer and send you the confirmed Shipping time via e-mail.
[Type] Avanza [Material] Aluminum (machined body) [Surface treatment] body: Hard-anodized [Lever ratio] L-34mm (Distance from lever pivot center to wire barrel center) [Handlebar diameter] Φ22.2 (Inch bar not available) [Wire Barrel Diameter] Φ8* [Outer end diameter] Φ9 / Φ8 (wire spacer used) [Lever adjustment: 5-way one-touch [Clutch switch] Roller type micro switch as standard equipment [Weight (excluding lever)] Approx. 210g
*This product is a holder only. *In case of plastic cover, it may be necessary to remove the cover. *38mm or more from the outer end to the center of the barrel (40mm or more when using a wire spacer) is required. *This product is exclusively for wire clutch vehicles, and by replacing with the stock one, the lever ratio will be changed and the clutch operation can be expected to be reduced.The rate of reduction varies from vehicle to vehicle, and clutch operation reduction is not guaranteed for all vehicles.Also, the wire stroke is reduced in relation to the lever stroke by changing the lever ratio.Depending on the vehicle and lever position, the clutch may not be disengaged. *This product is a universal product.It may not be able to be installed on some vehicles due to interference. *Color tones are for reference only.The color of the finished product may vary depending on the conditions of the material and manufacturing method. *The image contains other types of products. *There may be changes in product specifications due to the manufacturer's reasons.
* The image is only for reference. The image shown may differ from the actual product.
Here comes "AVANZA", the name of progress!!! In addition to the existing "Basic" and "Racing" models, the new "AVANZA" model is available! Best match design with brembo CorsaCorta master! Equipped with a new mechanism that allows for one-touch adjustment of the lever in five ways. In addition, the protrusion to the entire surface of the lever has been eliminated to increase the mounting clearance. Three lever ratios are available: 24mm, 29mm and 34mm, just like the Basic Racing!
■Equipped with a 5-way one-touch lever adjustment mechanism! ■100% made in Japan high precision machined hard anodized! ■KOHKEN Aero Lever can be used!!!! (Avanza is for Corsa Corta) ■Three sizes of lever ratios are available for each!!! ■The lever adjustment function is a separate system from the wire adjustment.More direct clutch feel. ■Equipped with a roller-type microswitch as a standard feature to minimize malfunctions. ■Compatible with two different wire outer end diameters with the included spacer. ■Optional mirror clamps are available. ■Avanza and Basic use black X coating, while Racing uses titanium coated holder pivot bolts for improved durability and reduced friction resistance.
[L-24mm] Just lighten the clutch!is this ratio. It is lighter, but has less traction, which means more half-clutching and slower cutting. *It cannot be used on the models wiht a lot of trailing edge like KAWASAKI Liter class (ZX-10, NINJA1000, Z1000...etc.).
[L-29mm] High balance of lightness and disengagement of the clutch!is this ratio. It is not as light as 24mm ratio, but it is lighter than stock. The sharpness is relatively sharp.
[L-34mm] Sharpness rather than lightness!is this ratio. It is as light as stock, but the clutch disengagement is as sharp as stock.
KOHKEN Aero lever for CorsaCorta (Part number: KOK-2074) and half lever for brembo CorsaCorta brake master (part number: 110.C740.98) (the logo will be reversed) can be installed.
Points of Attention
* If there may be an instruction manual included, it will be written in Japanese.
Recently viewed products
Ratings & reviews for this product or related products
I used the Foldable Clutch Holder, and even though it says that the Brake lever for brembo corsa crota can be used, the cormorant was not able to be used. However, when I used it, it was a clutch holder which was not usable.
Quantity:As you can see in the photo of the 1pc. eye, if it collapses just a little, it will not collapse due to interference. If it falls over, it is likely that the Lever will break or the Holder itself will be damaged. Clutch lever will cost about 7,000 yen, but if the Holder is damaged, 50,000 yen will fly away. It seems to be an obvious design error.
I tried to cut off the interfering part, but the other side of the cut off side was also interfering, and I gave up cutting off that side because it was the place where it would be easily seen if I cut off the other side. Folding Type Clutch Lever that cannot be overturned The product is to be used as a
I think this is a clear design error and should be recalled and replaced with a countermeasure. We recommend that you do not purchase if you are considering purchasing.View Detail
* The BEST and MUST store to find Japanese parts. * Register now for amazing deals and other special offers! *Over 800,000 listed items. It's hard NOT to find your parts.
SIGN IN TO WEBIKE JAPAN
Please enter email at least 6 characters.
Please enter a valid email address.
Email is already in use.
Your account has been banned.
Email address and/or password is not match.
Authentication with facebook fail.Please try again.
Please select How did you get to know about Webike Japan?
OR
YOUR ACCOUNT HAS BEEN CREATED!
Congratulations! Your new account has been successfully created! You can now take advantage of member privileges to enhance your online
shopping experience with us. If you have ANY questions about the
operation of this online shop, please email Webike through CONTACT US.
A confirmation has been sent to the provided email address. If you
have not received it within the hour, please contact us.
Get on your grid by register your motorcycle! About our "Mybike" service
"Easier to Search Items" It helps you to search items to fit for your motorcycle!
"Get Much Valuable Information" It helps you to get special deals, newly listed items and closeouts about your motorcycle!
"Easy to Register" It requires only your motorcycle manufacturer, model name and model year!