A tapered pipe is installed at the entrance of the exhaust pipe to increase the initial exhaust velocity and make it closer to the stock exhaust pipe performance.In addition, the exhaust pipe form is also designed with a subtle compound radius in order to make it look like a stock exhaust pipe. The hand-bending method is the same as the "Mike the Pipe" method familiar to long-time F1 fans.
Points of Attention
* If there may be an instruction manual included, it will be written in Japanese.
Since the oil level was gapped to Large width, I adjusted it correctly and found that the Carburetor The setting has changed, Main jet 170, 1 and 1/2 steps from the top of Needle, and Pilot Jet 30, Pilot screw2 and 1/4 back, this is a good place to be!
The way to adjust the 1/2 of the Needle is to have a thick Washer on top of the Clip, and under the Clip There is a white washer, and a thin washer underneath it, but there is also a thin washer and a thick washer If the washer is replaced, it will be half as thick as the clip positionView Detail
I have not done the Carburetor setting, although there are some AfterFire, it is considerably fewer than the Exhaust System I've been using until now ('∀ `)
Hand Bent Exhaust Pipe is very beautiful, ◎ is OEM look.
For my SR 3 type, Normal Air Cleaner Box Spec. As a result of making the setting of the carburetor variously thick or thin, Main jet does not raise the number, Needle raises the Clip one more and is the second from the top (The needle descends by one step) , Pilot Jet for me 27. Pilot screw turned to No. 5 and the Normal Carburetor hit came out and it felt comfortably rushing up. I often hear that the performance drops when replacing SR with an external exhaust system, but I think that it is the opinion of those who did not properly set the Carburetor that matched the exhaust system properlyView Detail
The delivery date took about a month, and it finally arrived at hand. I am satisfied with the appearance also OEM-like and sound. It was an exchange from the OEMExhaust System, but it was a degree that AfterBurn got a little without carburetor adjustment. Personally I do not care much. Touring became even more fun.View Detail
* The BEST and MUST store to find Japanese parts. * Register now for amazing deals and other special offers! *Over 800,000 listed items. It's hard NOT to find your parts.
SIGN IN TO WEBIKE JAPAN
Please enter email at least 6 characters.
Please enter a valid email address.
Email is already in use.
Your account has been banned.
Email address and/or password is not match.
Authentication with facebook fail.Please try again.
Please select How did you get to know about Webike Japan?
OR
YOUR ACCOUNT HAS BEEN CREATED!
Congratulations! Your new account has been successfully created! You can now take advantage of member privileges to enhance your online
shopping experience with us. If you have ANY questions about the
operation of this online shop, please email Webike through CONTACT US.
A confirmation has been sent to the provided email address. If you
have not received it within the hour, please contact us.
Get on your grid by register your motorcycle! About our "Mybike" service
"Easier to Search Items" It helps you to search items to fit for your motorcycle!
"Get Much Valuable Information" It helps you to get special deals, newly listed items and closeouts about your motorcycle!
"Easy to Register" It requires only your motorcycle manufacturer, model name and model year!