?
* The BEST and MUST store to find Japanese parts.
* Register now for amazing deals and other special offers!
* Over 800,000 listed items. It's hard NOT to find your parts.
Congratulations! Your new account has been successfully created! You can now take advantage of member privileges to enhance your online
shopping experience with us. If you have ANY questions about the
operation of this online shop, please email Webike through CONTACT US.
A confirmation has been sent to the provided email address. If you
have not received it within the hour, please contact us.
Used in CYGNUS.
Personally, I prefer the way the braking force rises proportionally from the Brake lever input.
It is recommended for those who make a kick rack to turn, enter a Corner while leaving a Brake, or use a lot of Brakes to turn.
I know I'm writing something cool, but does anyone understand this feeling aside from being good at it?
And when used continuously at high speeds or on mountain passes, the braking force is insufficient. I used it with 7R for a while, but switched to another Manufacturer because of this.
Fits: HONDA SHADOW750 97-03 [Type:F]., HONDA VT1300 CX 10 [Type:F]., SUZUKI RF400R 93-97 [Type:WF]., HONDA Rebel500 17-23 [Type:F]., HONDA Rebel250 S Edition 20-23 [Type:F].
This is a replacement from the OEM
Don't forget to check the part number and model number.
There seem to be many types for CYGNUS, so it seems that we need to be careful not to buy the wrong one.
I did the first pad replacement for the Disc brake.
If you follow the procedure, I think you can replace it without any problem the first time, but it's not as difficult as it sounds. Difficult." I think he is a good person.
If the brake fluid is replaced when it is low, it may be necessary to replenish the fluid.
In any case, be very careful about air biting.
(*The Meter panel and the Panel around the Handlebar need to be removed for Fluid replenishment and high officials).
In my case, there was a problem on the Caliper side and I had to reassemble it three times.
The cause was rusting of the Piston.
One of the two Pistons was rusted and malfunctioning and was not working properly.
I was able to get it to work normally, but I think it would be better to overhaul it or replace the entire Caliper as soon as possible in the future.
In that case, I plan to consult and request work from PRO.
In addition to Brakes, there are unexpected adverse effects and discoveries when replacing parts.
If you have any concerns about doing maintenance yourself, it is safer and more reliable to leave it to a specialist such as a motorcycle shop.
Even in the middle of maintenance that you started on your own, do not hesitate to turn to PRO if you are unsure or feel insecure.View Detail
Fits: HONDA SHADOW750 97-03 [Type:F]., HONDA VT1300 CX 10 [Type:F]., SUZUKI RF400R 93-97 [Type:WF]., HONDA Rebel500 17-23 [Type:F]., HONDA Rebel250 S Edition 20-23 [Type:F].
Neither good nor bad
Braking power was sufficient.
Aggression to DISC does not seem to be that high.View Detail
Fits: HONDA SHADOW750 97-03 [Type:F]., HONDA VT1300 CX 10 [Type:F]., SUZUKI RF400R 93-97 [Type:WF]., HONDA Rebel500 17-23 [Type:F]., HONDA Rebel250 S Edition 20-23 [Type:F].
Fits: HONDA SHADOW750 97-03 [Type:F]., HONDA VT1300 CX 10 [Type:F]., SUZUKI RF400R 93-97 [Type:WF]., HONDA Rebel500 17-23 [Type:F]., HONDA Rebel250 S Edition 20-23 [Type:F].
This is a replacement for the OEMPad and it works fine.
Static power is also not a problem.View Detail
Fits: HONDA SHADOW750 97-03 [Type:F]., HONDA VT1300 CX 10 [Type:F]., SUZUKI RF400R 93-97 [Type:WF]., HONDA Rebel500 17-23 [Type:F]., HONDA Rebel250 S Edition 20-23 [Type:F].
Brake's Touch is very good and it is good enough for STREET use. There is a feeling of customization for red.View Detail
Fits: YAMAHA TT250R 93-99 [Type:R]., SUZUKI TS200R 89-95 [Type:R]., KAWASAKI KLX250SR 93-97 [Type:R]., YAMAHA XT250(SEROW) 05-20 [Type:R] 3C51-7/M/S/Y, 1YB9
About quality and texture: High quality and looks high qualityAbout the feeling of use: massive upgrade from the original pads, greater bite and harder to fadeProducts to buy together: Brake oil and front brake padsDifficulty of installation: easy, loose a few nuts and slide in the brake caliper Cost performance and comparison with other products: Cheaper than EBC and as good as them.About shipping and packaging: packaging is nice and safe, and it arrived with no damagesView Detail
Fits: SUZUKI SFV650 10 [Type:F left side]., KAWASAKI Ninja650R 09-11 [Type:F left side]., KAWASAKI Ninja650 12-16 [Type:F left side]., SUZUKI GSR750 11-15 [Type:F left side] ABS, SUZUKI GSX750F 98-06 [Type:F left side].
I bought these to replace 15k OEM pads on my second hand SV650. The original ones still had meat on them but appeared glazed and possibly contaminated, nevertheless, it's the first time in my riding career where literally the first use of new (un bedded) pads was magnitudes better than the old, bedded ones. The lever is now harder, and there's actually a proper bite to the front brakes. Slightly aggressive while still remaining progressive, and overall much more performant than the old pads. It's safe to say I'm happy!View Detail
Fits: HONDA MONKEY125 19-22 [Type:F] ABS, HONDA MONKEY125 19-22 [Type:F]., HONDA CT110 HUNTER CUB(CT125) 20-23 [Type:F]., HONDA DAX125 23 [Type:F]., HONDA GROM 13-23 [Type:F].
About quality and texture: Good quality and abrasive.About the feeling of use: Excellent initial bite and little fade compared to OEM but at end pressure it does not lock. Products to buy together: Front/rear pads of the same timeDifficulty of installation: Simple, but had mechanic to install.Cost performance and comparison with other products: Better than OEM.About shipping and packaging: Well packaged and fast delivery by WeBike as usual.Any concerns, cautions, or advice when purchasing: NoneView Detail
Fits: SUZUKI GSX-S125 18-23 [Type:R]., SUZUKI Gixxer 150. 17-18 [Type:R]., SUZUKI GSX-R125 18-23 [Type:R]., HONDA GROM 13-23 [Type:R]., HONDA DAX125 23 [Type:R].
About quality and texture: Well finished with bright paint and abrasive surface.About the feeling of use: Has very good initial bite and does not fade after heat or rain. Much better than OEM.Products to buy together: Front/Rear brake pads of the same type.Difficulty of installation: Simple, but had it replaced by a mechanic.Cost performance and comparison with other products: Better feel than OEM.About shipping and packaging: Well-packaged and fast shipping as always.Any concerns, cautions, or advice when purchasing: None.View Detail
Fits: HONDA CB125R 18-21 [Type:F]., HONDA CB250R 18-23 [Type:F]., HONDA CB250R 18-23 [Type:F] ABS, HONDA CB650R 19-23 [Type:WF]., HONDA CBR650R 19-23 [Type:WF].
About quality and textureAbout the feeling of useAbout DesignAbout Size ChartCost performance and comparison with other productsAbout shipping and packagingAny concerns, cautions, or advice when purchasingView Detail
Purchased for regular replacement.
If it were a little cheaper, I could get a stable replacement...View Detail
?attachment
The CBR650R is mounted at the same position angle as the NORMAL.
However, when the handlebar was cut to the Left lock, it interfered with the interior cover next to the Meter, so the interior cover was cut away.
I also purchased a 45° angled banjo adapter for the mesh hose to accommodate the tension of the mesh hose.
・NORMAL (Reserve integrated horizontal master) Impressions of
No complaints on public roads. Familiar feel and very easy to handle.
However, when the brake is set to "hard brake," the rate of increase in braking force relative to the input seems to decrease, and the brake becomes more forceful.
Radipon (Reserve separate body portrait master) Impressions of
It was totally different from what I expected, my expectation was that it would feel like a Rear brake…
It is really a mild and easy-to-handle radipon.
On public roads, it feels like NORMAL! I wonder if it's because NORMAL is the same NISSIN?
But I felt the radipon effect from Breaking a little stronger, and
It can be hung up to a hard brake without effort.
I felt trust that this could stop.View Detail
I purchased this for use with multiple Helmets. 。
Mount included with the BOLD.
Microphone and speaker are not included and must be purchased separately.View Detail
Grip that had been used for a long time was worn out and had to be replaced.
They are soft and dampen vibration.View Detail
[How is it used?
Used to lick Screw loose.
Was the one you received as per Image?
As per Image.
How was your experience with it?
When used on a strongly tightened Screw, it can be safely and securely removed.
The licked Screw was removed.
It is also useful for DIY Screw removal.
[Points to note]
When used on a licked Screw, it is best to beat it in with a Hammer before use.View Detail
To continue viewing this product on Japan domestic webike (in Japanese), press "Go to Japan Domestic".
THE LARGEST
SHOP IN JAPAN
EXCLUSIVE COUPONS,
SALE, DEALS
FAST, RELIABLE
SHIPPING