I bought it for the air pressure chukes before touring.
Quality and texture;.
I'm satisfied
The texture was not cheap.
Performance:
No complaints. I have not used other air gauges, but I think it works well enough for personal use. It is easy to measure the gold part of the mouth because it fits firmly.
I also like the ability to add extra air and reduce the air pressure while watching the needle.
Ease of use:.
The Instruction Manual is included and was easy to use, even for beginners. I think it would be a good first one.
And the Hose is still good.
Cost of service:.
I am satisfied. If you can get it for this price, it's good enough for me.
I've only just started using it, so if I can use it for a long time in the future, I might appreciate it even better.
It was a product from Emon that was relatively affordable and I would highly recommend it.
[How is it used?
I had been using their air gauge item number 6777, but the meter part was integrated with the nozzle and interfered with the brake disc and driven sprocket during measurement, which made it difficult to use. I chose this product because it has a hosed valve insert.
How was your experience with it?
Compared to my previous product number:6777, it is much easier to measure.
The measurement error is also small at ±10kPa, so I don't think it's a problem.
[Points to note]
Although the part that touches the valve rotates 360 degrees, the 45-degree angle makes it interfere with the valve a little, so it may not be suitable for large calibers such as brake discs.
It is recommended that you look for one with a 90-degree angle.
How did it compare to other products?
The integrated measuring unit may not be suitable for Motorcycle.
I would like to see a 90-degree angle one for motorcycles, though this may be unavoidable due to its low price.View Detail
The tip is angled at about 45 degrees and the selling point is that it rotates, but it's the most difficult to use!
I hardly use it now.
I'm looking for another easy to use air gauge.
(For motorcycles that have not removed the tire)View Detail
Tire Gauge conveniently bought three kinds. Gauge without other company's Hose got the CRF 1000 LAfrica Twin that we own, made it by Emon because Desk interferes with it and it can not measure it well and it gets out of air every time we measure it, but this is excellent. I found it difficult to measure that Motosecycle had no Hose. I should have made it from Emon from the beginning. But, everything is study.View Detail
I replaced the air gauge I used before because I got sluggish
Although accuracy is ???, I think that it is not bad if you consider it for normal use
I think Cost performance is good
View Detail
I used it for a while, the needle did not return to 0. Well, as long as I interpret and use it intentionally that the displayed values ??are correct, the inner needle has stopped moving. Or more, it happened about two years after purchase.View Detail
THE LARGEST
SHOP IN JAPAN
EXCLUSIVE COUPONS,
SALE, DEALS
FAST, RELIABLE
SHIPPING